Starting with version 3.0, performance counters can now also be configured to retrieve information via SNMP.
With new installations, the "Performance System" system health package is already pre-configured to include both Windows performance counter information as well as SNMP OIDs for most counters.
If you are upgrading from version 2.93 (or earlier) however, you will need to manually configure the performance counters and add the SNMP information.
In the management console, expand the "System Health Packages" and locate the "Performance System" package, expand & select the object to view all configured performance counters.
When you are done, don't forget to assign the "Performance System" package to the network devices you wish to monitor.
Follow the steps below to add SNMP information to the "CPU" counter:
Repeat the steps above for the following counters and use the respective SNMP counter:
Page File Usage
System Memory Percent Free
Also configure this counter to "Divide /" by a 2nd counter 188.8.131.52.4.1.2021.4.5.0 and check the "Use multipler" check box and enter 100 for the multiplier.
This counter can be configured to support either SNMP v1 or SNMP v2c/v3. If you would like to support both SNMP versions then you will need to use variables.
Divide By: 184.108.40.206.220.127.116.11.1.5*2
Multiply By: 800
Divide By: 18.104.22.168.22.214.171.124.1.1.15*2000000
Multiple By: 800