Please enable JavaScript to view this site.

Navigation: Zusätzliche Tipps und Ressourcen > Event Log Reference > Common Events

Hardware

Scroll Prev Top Next More

These events are logged by hardware drivers, such as SCSI controllers, network card drivers etc. An event log entry is often the first indication that a hardware problem exists.

 

Event Log

ID

Type

Source

Message

System

4

Warning

b57w2k

Broadcom NetXtreme Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected.

Application

1001

Warning

DPTELOG

The DISK at (0,0,0,0) returned SCSI status: Check Condition at Sun May 23 16:38:56 2004.

Application

1002

Error

DPTELOG

Non-corrected ECC RAM error found for device (0, 0, 0, 0) at Fri Jun 04 14:14:32 2004.

RAM address: 0x809F2800

Application

1027

Warning

UPS Event

UPS disconnect! Cannot retrieve information from the UPS.

System

1

Error

afasa

\Device\Afa0: SMART WARNING: ID (0:2:0)=FPT_EXCEEDED

System

11

Error

Disk

The driver detected a controller error on \Device\Harddisk0\Partition2

 

Strings in italic may vary depending on what triggered the event