Please enable JavaScript to view this site.

Event Log 32 n t

Die folgenden Ereignisse werden mit der Ereigniskategorie Environment Sensors protokolliert.

 

Event ID

Severity

Event Description

Example

10903

Error

No environment monitor found

EventSentry was unable to find a temperature and/or humidity sensor on serial port COM1. Please make sure the device is connected properly.

10904

Error

Database interval too small

The database write interval for environment monitoring is set too small. The interval was automatically adjusted to 900 seconds.

10908

Error

The temperature has fallen outside the configured range.

The current temperature has fallen outside the configured range (60F to 76F). The current temperature is 83.58 degrees (F).

10909

Error

The humidity has fallen outside the configured range.

The current humidity has fallen outside the configured range (10% to 60%). The current humidity is 9%.

10910

Information

The temperature is back inside the configured range.

The current temperature is back in the configured range (60F to 76F). The current temperature is 74.57 degrees (F).

10911

Information

The humidity is back inside the configured range.

The current humidity is back in the configured range (10% to 60%). The current humidity is 12%.

10912

Error

Motion detected

Motion sensor (Server Room ABC) detected motion.

10913

Error

Smoke detected

Smoke sensor (Server Room ABC) detected smoke.

10914

Error

Water detected

Water sensor (Server Room ABC) detected water.

10915

Error

Smoke sensor failed self test

EventSentry failed to detect the required self-test of the smoke sensor which is run every 24 hours. Please press the TEST button on the smoke sensor for at least 30 seconds to make sure that the sensor works correctly and an alert is generated by EventSentry.

10916

Error

Sensor error

The attached Water sensor reported an error, or no sensor is attached. This feature has been turned off.